.
Добавлено: Чт ноя 28, 2013 4:34 pm
.
Diesel Mod:
C35 : remove
C34 .047uF
C25 : remove
------ these three mods remove harsh
C42 1uf
D3 LED
D4 1n4001
------ make the sound more dynamic and full
C36 .1uf
------ EQ more usefull
Boogie/Bogner mod:
C35 a enlever
C34 .047uF
C36 1uF
D3 led
D4 1n4001
EN PLUS:
R46 increase values, more pre-distortion + mids
R41 reduce value you obtain more distortion (470ohms to start)
Mods don't have the same sound of diezel amp or Bogner amp, but it can be better tant the stock sound.
Keeley mod:
C20 .22uf
c42 .1uf
c37 , c39 , c17 , c11 1uf
c8 .22uf
c9 .1uf
c20 .22uf
d3 , d4 LED
One other thing you can do to make the unit a little more deadly is to add more gain. If you trace the path of the Gain control (a 200k pot), one end of it goes to a 1k resistor. Replace that 1k resistor with another resistor, anywhere from say 39k to 68k, whatever you have on hand. That will raise the gain of that stage from 202x to 270x (if you use a 68k resistor).
The gain bit is r37/C19
))